Variable Voltage, Variable Wattage and Resistance
Vaping at the right settings!
Variable Voltage Variable Wattage Resistance: Vapor Clouds and Ecstasy!
Oi Bloggers! In this post we will discuss Variable Voltage Variable Wattage Resistance. Before Crazyvapes.com came into fruition, I frequented various electronic cigarette retail stores. Having observed several transactions when standing in the checkout line, I often noticed a missing element of critical communication between the clerk and the patron. They were frequently failing to relay the instrumental information between variable voltage vaping and the proper resistances. That is why having a thorough understanding of Variable Voltage Variable Wattage Resistance is so important.
During a recent account of this situation, a customer was inquiring as to why his “e liquid felt too harsh.” I overheard the clerk’s first question: “well, what’s your nic level?” Although it was 24mg, the few minutes of this conversation revealed nothing of an attempt on the clerk’s behalf to discover what the resistance was of the coil head within his CE-6 clearomizer. The customer left uninformed, and I… Appalled. This was not the only time either. I’d venture to even say that most vendors selling ecig products conduct their sales without ever educating their consumers about Variable Voltage Variable Wattage Resistance:. So allow me.
Variable Voltage Variable Wattage Resistance: What does it mean?
A variable voltage e cig or mod should be set relatively proportional to the resistance (ohm) of the connected cartomizer, atomizer or coil. LR (Low Resistance) cartomizers roughly range from 1.5 ohms to 2.2 ohms. For ohms of 1.5 to 2.2, one should vape at no higher than 3.7 volts. Slightly higher resistances allow for a little leeway of voltage. LR cartos may be vaped at a slightly higher voltage than 3.7V, yet raising the volts any higher for this resistance range poses a risk to it’s coil. This may lead to a burn-out, causing the e juice to overheat or over burn. It may also lead to a full coil blow-out, rendering the cartomizer useless. Otherwise, it may create a burnt or unpleasant flavor. Or, it may suit your liking. Either way, one ought heed caution when vaping at low resistance.
If LR vaping is not your cup of e juice, perhaps a standard resistance may be. SR cartos or coil heads generally run between 2.8 ohm to 3.2 ohm general range, although I’ve seen them marketed and sold as low as 2.4 resistance. Voltage for these can be cranked up to 5.0V, although i’d recommend closer to 2.8 to 3.2 ohms for higher than a 4.8 Voltage. At these settings, you’ll likely notice a harder throat hit and more vapor. I currently use 4.8 volts on a 2.8 ohm cartomizer with a pyrex glass tank on the end of a Joyetech Ego c-twist from WWW.CRAZYVAPES.COM… Get one today:D I find the strength, nic intake and flavor very fulfilling with this setup, yet I sometimes prefer High Voltage Vaping. This is where High Voltage Cartomizers come into the fold.
HV Cartos range from 3.5 ohm to 5.2 ohm. If one is using a 6.0 Voltage Mod cranked to the max, use at least a 3.5 ohm cartomizer, although I recommend 4.5 ohm for optimal enjoyment. Anything above 6.0 volts such as 7.4 volts (Eh hem… Uh, I do not, for the record, suggest stacking batteries. There, I said it), use the highest ohm possible… 5.2 ohm. A general rule of thumb: The higher the volt, the higher the ohm proportionally. This will ensure a wattage output to your liking. leading to the next subject.
Variable Wattage Mods, if set to VW mode, will detect the resistance of the attached coil and set your voltage accordingly. Wattage = Voltage squared divided by resistance (ohm). So a 4.5 ohm carto set at 6 volts wields a power output of 8 watts. Think of variable wattage as the power produced based upon it’s coil’s resistance. Wattage is the result of the two.
Variable Voltage Variable Wattage Resistance: The Science behind it.
Now, while wattage IS pure physics and an exact exact science, the terms of resistance may not be. Think about the term LOW resistance: “Low” is an adjective to describe a subjective perspective. A 3 foot table may be very low to Manute Bol (One of two of the tallest basketball players in history, standing 7’7), But not so much to a dwarf. So in reality, LR, SR and HV are simply terms of opinion, although most manufacturers market their cartomizers with the latter of the ranges I have explained. In regards to variable voltage variable wattage resistance etc… one may even deem this entire topic as subjective. In the end, it all boils down to personal preferences.
Well, that about wraps it up folks. I hope you have a better understanding of Variable Voltage Variable Wattage Resistance. VAPE ON and we will see you on our next post!
Have a delightful “CRAZY VAPES” experience!
-Geno Spaghetti